Infrared Sensor

IR Proximity Sensor for line follower and Obstacle sensing Robots
Range : 10-15 cm
2.Input supply voltage: 5V DC
3.Three-pin burg male header for easy interface.
4.Comes with an easy to use a digital output pin
5.2.5mm diameter hole for easy mounting.
6.5V operated, easy to interface with a wide range of micro-controller, Like ARDUINO, AVR, ARM, 8051, PIC, MSP430, etc.

Digital output. Output Voltage for Logic one(+3.5v) and Logic Zero(0) 0.0v
Interface with ARDUINO, AVR, 8051, PIC, ARM, MSP430 (Green)

IR Proximity Sensor (2 pieces) by Robokidz

Start innovating!

This multipurpose infrared sensor can be used for obstacle sensing, line sensing robotics, and also as an encoder sensor. It provides a digital output of 1 or 0 when an object is placed in front of the sensor with logic zero (0V) output. Get notified whether the device is receiving enough power with the inbuilt LED indicators and start experimenting with your ideas!

ONBOARD LEDs

Onboard LEDs indicate if the module is connected properly and indicate when threshold values are touched. This makes the sensors great for DIY projects and Arduino beginner to start experimenting with various ideas.

APPLICATION IDEAS

This sensor is used for obstacle avoidance robot or line follower robot. It works even for applications where motion detection is needed.

OPERATING VOLTAGE

Positive power pin and this should be connected to VCC (or +5V) and the ground pin should be connected to GND (or 0V) of the microcontroller.